A complete guide to diamond saws

by | May 20, 2013 | Construction & Maintenance

Latest Articles



Diamond saws are among the best saws you’ll ever find. They are made from real diamonds which can cut through just about anything. You’ll be astounded to see how diamond saws make short work of just about everything you can think of.

You can use diamond saws as precision implements to cut almost any type of material in any way you can think of. However, these things take some mastery and it’s important to understand some fundamentals before you start using them. Furthermore, not all diamond blades are there to do the same job. Different jobs will require different types of blades. That’s what this guide is for. To help you understand the different types of diamond blades and how to use them, for anyone diamond sawing in Kent.

Diamond blades

Basically a diamond saw is one with a blade which has diamond particles attached to a metal cutting edge which is either made of a core of steel or has been completely infused with diamonds. Each blade varies and you can tell the difference by the diamond concentration and the blade diameter. Also, take note of the diamond grade type and the depth of the diamond, as this too can affect operation.

Advantages of diamond blades

Diamond blades have many advantages over traditional carbide blades. They can be used on all types of material for starters, since nothing is harder than diamond, which also means they have a much longer life. You will also get a more consistent performance out of your diamond blade, whether you’re diamond sawing in Kent or elsewhere.

Another advantage is that when you’re using a diamond blade, the cuts will be much more precise than an ordinary metal or carbide saw. The blade won’t deform the material and will just cut through at a consistent speed. The knock-on effect of this is that you will get much more sawing done and there will be less waste produced.

Cutting techniques

There are many ways to cut things using a diamond blade. You can cut slivers, curves or slice through the material, as well as produce wafers or grooves with your diamond blade. However, you must remember that intermittent cutting is important to let the blade cool after heavy operation. How often you should allow the blade to cool will depend on the material being cut. It could vary from a couple of seconds to many depending on how hard the material you’re trying to saw is. You should also use shallow cutting techniques. This will prevent the diamond blade overheating. Never force the diamond saw through the material you are cutting. Allow the saw to go at the speed it chooses.

For flawless construction work CA Drillers offer diamond sawing services in Kent, UK. Their diamond sawing creates precise cutting of all construction materials from only highly trained engineers.