Troubleshooting Issues With Water Heater Installation on Helotes TX

If a home’s water heater isn’t working as it should, repair may be an option. Regular maintenance and repair can significantly extend the lifespan of a water heater, and most repairs are fairly simple. Homeowners can Visit website and follow the troubleshooting tips below to assess water heater problems, and they can also read on to learn how long a unit should last.

To Repair, or Replace?

Based on the manufacturers’ averages, a water heater can last up to 12 years. However, that figure can vary based on the unit’s design and placement, the quality of the Water Heater Installation Helotes TX and its maintenance schedule. Local water quality also plays a role. If the home’s water heater is over a decade old, or if it doesn’t work normally, replacement may be the right choice. However, the homeowner should check to ensure that minor electrical issues (such as a tripped breaker or blown fuse) aren’t to blame.

Common Troubleshooting Tips

The most commonly reported water heater issue is water that isn’t as hot as it should be. Such problems are usually due to a failure of the heating element or thermostat. Homeowners should check the power connection, reset the thermostat or raise its setting before calling a contractor. If service is required, the tech can flush the sediment from the water heater tank, replace the heating element or install a new thermostat.

Possible Problems

Many customers report hearing strange noises coming from the water heater. A sizzling or hissing noise may point to severe sediment buildup within the tank. A leaky pressure relief valve can result in a flooded home, and should be professionally replaced as soon as possible. A plumber who handles Water Heater Installation Helotes TX can replace the valve, tighten fittings, and replace parts as necessary.

The water heaters of today provide largely hassle-free operation, but regular maintenance can increase a unit’s lifespan. A contractor can drain the tank twice per year to get rid of corrosion-causing sediment, increasing the heater’s efficiency. During the service call, the tech can test the pressure relief valve, and they can adjust the thermostat to reduce damage caused by overheating.

Sharing is caring!