As the weather starts to cool down, many homeowners should start thinking about the condition of their heating systems. Making sure that a home’s Heating in Gilbert is functioning well can eliminate many issues from occurring once the unit is being used on a regular basis during the colder months of the year. Not only can it be a nuisance to have a heater break down during the winter months, but it can also be more costly to have it repaired as well. By spending some time in maintenance before the unit is put into use, these types of issues can often be avoided.
One of the main things that a homeowner will want to do is to spend some time cleaning their unit. Over the course of time, a heating system will tend to collect a lot of dirt, hair and other matter. This dirt can cause the unit to run inefficiently and much harder than it was designed. This can lead to components in the system breaking down when it is needed most. Cleaning the unit generally entails using a vacuum cleaner to clean the dirt from around the unit and inside it. A stiff brush can also be effective in cleaning dirt and other matter from inside vents or grilles on the system. This will allow air to circulate through the unit and can help in preventing components such as the motor from overheating.
The burner on a system for Heating in Gilbert should also be checked as well. With the heater on, the homeowner will want to look at the flames as they light up on the burner. Flames should be steady and blue in color. If they are not, this can be a sign that the burner needs to be cleaned. This can be a very time consuming process and it can be difficult for homeowners to handle on their own. Many times, it is best to call a professional to handle this issue. In addition, the technician can inspect other elements on the burner to ensure that dirt is the only issue.
The motor on the unit should also be inspected. Many motors have oil ports that require oil to be added on a regular basis. Many units have sealed bearings and so they may not require any oil to be added. The belt and fan should also be inspected and replaced if damaged.