Homeowners usually don’t think about Electricians until something major happens with their electrical systems. This is a mistake. People are putting their safety at risk by not paying attention to warning signs that indicate an electrician’s services are needed. At first glance, warning signs may just seem like nuisances, but they can actually mean that a home has a number of fire hazards that need to be rectified. It’s good to know that the warning signs of bad wiring can easily be recognized by people even if they don’t have any formal training as electricians.
If fuses and breakers have problems on a regular basis, it’s time for a homeowner to start calling Electricians in Lancaster County, PA. Circuit breakers help to prevent fires when they are activated as a circuit overloads. Without a circuit breaker, the circuit would continue to draw too much power and likely spark and catch fire. Fuses also offer protection against fire, but they aren’t reusable like circuit breakers. Once a fuse is blown, it has to be replaced with the same type of fuse. So, what can cause a fuse or circuit breaker to go out on a regular basis? Plugging too many high-amp devices into one circuit can easily cause an overload.
If it’s obvious that a circuit is being overloaded because of too many devices, simply removing a few of the devices will stop the problem. People usually overload circuits by using extension cords or power strips to plug more devices into a wall outlet than they should. If there isn’t any obvious reason why the fuse or breaker is tripping, there is probably a short somewhere in the wiring. This should be dealt with by an electrician before it gets more serious. R.S. Martin Electrical Contracting or another qualified electrician can help deal with overload problems.
Lights that dimmer or flicker may also indicate an overload somewhere in the wiring. This usually happens when another device is turned on somewhere in the home. It should be noted that dimming and flickering can be considered normal when a circuit is close to its full capacity. But, if it is known that there aren’t many power-hungry electrical devices running when the lights are flickering, there is definitely a problem with the wiring.