Maintaining an AC system can help it to be more energy efficient while extending its lifespan at the same time. An AC system that is dirty, not fully charged, or in need of repair can increase operating costs or suddenly quit working when it’s needed most. An AC contractor in Bryan OH can perform a maintenance inspection that will ensure the system is up and running at its maximum potential.
An AC system should have a maintenance inspection performed at least once a year. For most people, spring is the ideal time to have the system evaluated. During an inspection, the technician will clean the coils, check the compressor, the condenser and the fan, look for any loose or frayed wires, examine all of the mechanical parts, make sure there is even air flow throughout all of the registers, and check the thermostat to ensure it’s working properly. The technician will also check the refrigerant level and add more if it’s low. An annual inspection can help to detect problems early on before they turn into major ones.
Not Enough Cold Air
When the coils or the condenser on an AC unit are dirty, it can cause the system to be less efficient. This can result in the compressor running for longer periods of time when trying to reach the desired temperature. A dirty air filter may also prevent an AC unit from producing cold air. When an air filter is clogged, it can restrict the amount of air flowing through the evaporator coils. This can lead to the coils freezing up instead of sending cold air out through the vents. If the air conditioner is low on refrigerant or has too much of it, the system may operate poorly and only produce warm air.
In many instances, making repairs to an AC system costs far less than purchasing a new one. However, if the system is over eight years old or needs an expensive repair, it may make more sense to have an AC contractor in Bryan OH replace it with a new, energy-efficient model. A new unit will use less electricity, and that can add up to big savings. For more information, please contact us.