If you are having problems with your current Water Heater Allentown or don’t have one at all, get in touch with a reputable plumbing company such as Plumbing so the professionals can fix or replace your existing one, or install a brand new one. A water heater is a device used to heat water. Heated water is necessary for daily activities such as bathing, cleaning, and eating. Many businesses utilize warm to hot water in their operation processes. Heating water helps make it sanitary. This is beneficial for good health and personal hygiene.
A typical Water Heater Allentown resembles a metal cylinder. These tall cylinders are often installed into places that are convenient such as laundry rooms and basements. Water heaters are basically drums filed with water that is kept heated until it is used. The water is kept heated by a heating mechanism that is on the underside or side.
Some of the basic components of a traditional water heater include: a tank, a dip tube, a shut-off valve, a thermostat, a heating mechanism, a drain valve, and a pressure relieve valve. The tank is the inner shell of this appliance. This shell has a protective liner that holds about 40 to 60 gallons of hot water. The typical pressure range for this much water is about 50 to 100 pounds per square inch. This middle layer of the tank is made from an insulating material. The outer layer is decorative for aesthetic purposes.
The thermostat controls the water tank’s temperature. A sensible temperature to keep water heated to is between 120 to 180 degrees Fahrenheidt. This temperature is sufficient to make water suitable for household use, but not hot enough to pose a risk to children. By putting your thermostat on a lower temperature setting, you can significantly save on energy costs. Since keeping water heated requires the use of the water heater, the higher you set your thermostat will mean keeping your the water heater running longer. By consulting with a qualified plumber, you can have all of your water heating needs met by one person.